How To Make A Spooky DIY Skull Decor For Halloween-Pictureboxblue

Sharing is caring!

There are some wonderful vintage human skull drawings on Pictureboxblue that would look great framed for Halloween. I decided to take one of these vintage drawings up a notch, by creating some fun DIY skull decor for Halloween.

As Halloween is all about the night I thought it would be fun to frame and illuminate on of the skull drawings for some DIY Halloween wall decor.

skull head used for Halloween DIY skull decor

I know we normally associate Halloween with the colors of black and orange. But I decided to give my DIY skull decor an extra twist by going for a pink color theme.

I used pink neon el wire to illuminate the skull and then framed it in a complementary pink frame.

This is a very affordable simple but unique Halloween decor for the home. As the skull is illuminated in pink, I think I will actually keep the decoration up on the wall beyond Halloween.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

What You Need

what you need for Halloween decor

How To Make Illuminated Skull Decor

1.. Cut the foam board to fit the frame and place in the frame.

fitting foam board in the frame

2. Next print out the human skull drawing on to A3 paper. Then cut out the skull illustration using a craft paper-knife and mat.

cutting out vintage skull

3. Then, using a glue stick, stick the skull to the center of the framed foam board.

DIY Skull decor in frame

4. Next, using a sharp-pointed object such as a wooden skewer, punch holes into the skull at the wire entry points. These are highlighted in pink on the diagram below.

Where to punch holes for wire

Basically you need punch holes for the outline of the cranium, one for each eye, one for the nose, two for the cheeks and several for the teeth.

Punching holes in skull

5. Next, starting with the skull outline, thread the el wire through the foam board from the back to the front. Then stick the wire down so that it outlines the skull and then thread the wire back through the hole.

glueing el wire to skull decor

Use the brush superglue to stick the wire to the skull outline as you go around. Brush a small amount of glue onto the skull at about every 2 inches. Hold the wire down onto the glue for about 20 seconds as it sets.

6. Next, thread the wire up through the left eye socket and glue it around the socket. Thread the wire back through the same hole before repeating again with the right eye socket.

putting wire through board

7. Then repeat the same process of gluing the wire to around the nose followed by the teeth and cheeks.

I did not need to glue the wire when threading the teeth. The holes on the teeth were so close together they did not need glue to stay in place.

wireing up the skull
ading neon el wire to skull print

8. Finish off by taping any excess wire to the back of the frame to keep it in place.

All that is left to do is hang the DIY skull decor. I’m going to hang mine in the hallway of my home for now. But come Halloween, I’m going to hang him outside.

Back of the frame

Finally, switch the lights on by pressing the button on the battery box. The lights have three different modes, on, slow flash, and fast flash. They look really good, especially in the dark.

skull lit up
Pink neon DIY skull decor
Skull decor in the dark

I have other collections of vintage images on Pictureboxblue that I also think would look good illuminated with el wire for Halloween. These are the vintage skeleton illustrations and the spooky bat drawings.

Neon DIY Halloween Skull deocoration
Yield: Halloween skull decor for the wall

Illuminate DIY Skull Decor

Pink neon DIY skull decor

Use a wonderful vintage drawing of a human skull to create some fun Halloween decor for your wall. The pink illuminated skull decor will ad a bit for fun to your home.

Prep Time 20 minutes
Active Time 20 minutes
Total Time 40 minutes
Difficulty Easy

Materials

  • Skull Drawing - Free download
  • Neon Pink El Wire
  • Super brush glue
  • Black Foamboard
  • Frame

Tools

  • Wooden skewer
  • Paper cutting knife and mat

Instructions

  1. Select the vintage skull drawing you want from the collection on Pictureboxblue.
  2. Print out the skull and cut it out carefully using a paper cutting knife.
  3. Cut black foam board to fit the frame.
  4. Stick the cut out skull to the black foamboard using a glue stick
  5. Punch holes through the skull at key points around the outiside, eye sockets and mouth.
  6. Thread the El wire through the hole on the out sided of the skull from the back to the front.
  7. Using the superglue and brush, glue the El wire to the outside of the skull and then thread the El wire through to the back again.
  8. Next, thread the El wire up through the eye socket and glue the wire around the eye socket and then thread back through the same hole.
  9. Repeat with the other eye socket and then the nose. Finish off with the mouth.
  10. When the whole skull is outlined with the El wire, tape any excess wire and the battery pack to the back of the frame.
  11. Finally, the Halloween skull decor is ready to hang. Just press the button on the battery pack to illuminate the skull.

If you love the idea of illuminated Halloween decorations you should check out these upcycled Halloween bottles. Or if your just a fan of pink neon lights, then check out this neon pink heart for Valentines.

You can find more Halloween craft ideas here.

11 thoughts on “How To Make A Spooky DIY Skull Decor For Halloween-Pictureboxblue

  1. Claire, that’s fabulous !!! A pink skull is a first for me – I think your technique is fascinating and I’m really enjoying the pink look. Thank you for linking with us at Meraki Link Party.
    Naush

Leave a Reply

Your email address will not be published. Required fields are marked *